Frequently Asked Questions


The hot dip galvanizing process creates a combination of corrosion protection properties which are unmatched by other coating systems. The thick metallic zinc envelope completely covers the surface of the steel creating a series of metallurgically bonded zinc-iron layers. The tightly adherent middle alloy layers are, in fact, harder than steel core, providing a high level of resistance to mechanical damage in addition to corrosion protection. Since zinc corrodes preferentially providing cathodic protection to areas of bare steel, the structure remains protected even in the event of exposure due to abrasion or impact damage. The sacrificial nature of zinc prevents the exposed steel from corroding, eliminating any undercutting or blistering of the coating.A hot dip galvanized zinc coating has the capacity to provide maintenance-free protection performance for the designed lifespan of the structure. It has a rate of corrosion proportional to its thickness and directly determined by the environment to which it is exposed - typical lifespan expectations based on an 87 micron thick galvanized coating, for example, range from twenty years in a heavy industrial environment to more than fifty years in a rural one.Galvanized Coatings are thicker at corners and edges. The process is "self-inspecting." Any coating problems or inadequacies will be immediately apparent when the steel is withdrawn from the molten zinc. Unlike multicoat paint systems, this allows for immediate corrective action.
1. LOWEST FIRST COST- In many cases galvanizing now costs less to apply than coating with much shorter lives.
2. LOWEST LONG TERM COST- Even in cases where the initial cost of galvanizing is higher than a comparable alternative, galvanizing is almost invariably cheapest in the long term.
3. THE ECONOMIC CASE FOR GALVANIZING IS STILL IMPROVING- There is a high labour cost component inherent in the application of most other coatings and their cost directly reflects increases in the cost of labour.
4. LONG LIFE- The standard 2 oz. ft.² galvanized coating has a typical life without maintenance of more than 50 years in rural environments, and 20 to 25 years in urban and coastal conditions.
5. RELIABILITY- The galvanized coating is bonded metallurgically to the base steel so that it becomes part of the steel surface it protects. Coating life and performance are reliable and predictable.
6. COATING TOUGHNESS- A galvanized coating has a unique metallurgical structure which gives outstanding resistance.
7. ELIMINATION OF MAINTENANCE FOR LONG PERIODS- The use of galvanizing defers maintenance for long periods compared to other coatings for steel. Remember, hidden maintenance costs can be extremely expensive when they entail difficult access, or plant shut-down, and when structures are located in remote areas.
8. AUTOMATIC PROTECTION FOR DAMAGED AREAS- Galvanized coatings corrode preferentially to steel, providing sacrificial or cathodic protection to small areas of steel exposed through damage to the coating. Unlike organic coatings no touch up is needed when damage occurs.
9. COMPLETE PROTECTION- Every part of a galvanized article is fully protected, even recesses, sharp corners and inaccessible areas. No coating applied to a structure or fabrication after completion can provide the same protection.
10. EASE OF INSPECTION- Galvanized coating thickness is controlled automatically by steel thickness and a standard, minimum coating mass results. Soundness and continuity are judged readily by the eye.
11. MECHANICAL PROPERTIES- Galvanizing has no effect on the mechanical properties of commonly galvanized structural steel.


The standard wood used on benches ,planters and trash containers is South American Ipe but any other type may be substituted.
FAMILY NAME: Tabebuia avellandedae, tabebuia ipe and tabebuia serratifolia of the family bignoniaceae.
COMMON NAMES: Ipe, pau d'arco,ipe tabaco, bethebara, iapacho, ebene vert, amata prieto, ironwood, greenheart,guayacan, brazilian walnut.
HEIGHT/WEIGHT: Trees can reach 200 feet with trunk diameters of 6 feet and boles clear to 80 feet or more.Weight varies between 60 to 75 lbs per cubic foot with a specific gravity of 1.08.
PROPERTIES: one of the most stable of all the durable timbers. Dries extremely well with little checking, twisting or bowing and is widely recognized for its strength and natural resistance to decay without the use of preservatives or treatments. In tests by the U.S. navy, ipe was one of the best performers in resistance to decay, termites and borers. It is a heavy timber, generally sinks in water and has a fire class rating of class A, the same as concrete or steel.Moderately difficult to work with as it has a blunting effect on tools.
ENVIRONMENTAL CONCERNS: As part of our continued commitment to a better environment, T.F.M.C. sopports only those suppliers who implement sound logging practices such as selective harvesting and low impact logging. Ipe as well as any other lumber harvested in Brazil are governed by IBAMA.(The Brazilian institue of environment and renewable natural resources). This is the national agency that issues the strict guidelines for sustainable and responsible forestry management practices. All T.F.M.C. wood is from legally harvested logs and are supplied in compliance with all foriegn and domestic laws and regulations and is covered by IBAMA. T.F.M.C. proudly supports environmentally responsible forest management and global forest sustainability efforts. A little goes a long way.
DIMENSIONAL STABILITY: Stable, minimal checking or warping.
WEIGHT IN lbs per cu. ft.: 60-75 lbs


T.F.M.C. ships products to all areas of the world on a regular basis.
All shipments are prepaid or FOB factory at 1021 Rangeview Rd. Mississauga On. Canada.
All T.F.M.C. products are shipped assembled and ready for installation unless otherwise specified.
All product prices quoted do not include freight charges.
Freight is shipped by carrier of our choice unless otherwise specified.
We do not assume any responsibility for fluctuations in freight charges.
While we do everything possible to ensure your order arrives in good condition and on time,we cannot be held responsible for freight damage or delays. Orders should be checked immediately upon delivery and if there is damage, the freight company should be contacted immediately.
If for any reason the shipment is incorrect or quantities are improper, please advise T.F.M.C. within two working days of recieving order.


All goods are manufactured and supply only.
No setup or installation included.
Hardware for installation not supplied.
All taxes and freight are extra.
Terms are C.O.D. unless otherwise stated or arranged.
A deposit of 35% of the total order is required before starting production.
Any balance owing is to be paid in full upon order pickup or before goods are shipped.
All sales are final. No exchange or refund.
Please contact office at 905 891-2516 for further information.